Vitara JLS (2Dr) 2WD L4-2.0L (2001)
Wheel Cylinder: Service and Repair
REMOVAL
1. Perform steps 1) to 5) of BRAKE DRUM REMOVAL.
2. Perform steps 2) and 4) of BRAKE SHOE REMOVAL.
3. Loosen brake pipe flare nut (or nuts) but only within the extent that fluid does not leak.
4. Remove wheel cylinder mounting bolts. Disconnect brake pipe (or pipes) from wheel cylinder and put wheel cylinder bleeder plug cap (1) onto
pipe to prevent fluid from spilling.
INSPECTION
Inspect wheel cylinder disassembled parts for wear, cracks, corrosion or damage.
NOTE: Clean wheel cylinder components with brake fluid.
INSTALLATION
For Non Sealed Type
1. Take off bleeder plug cap from brake pipe and connect pipe (or pipes) to wheel cylinder (1) just enough to prevent fluid from leaking.