Vitara JLS (2Dr) 2WD L4-2.0L (2001)
INSTALLATION
Install removed parts in reverse order of removal procedure. After installation, adjust belt tension for specification and tighten each bolt and nut
securely.
Tightening torque
Cooling fan/clutch nut (G16 and J20 engines) (a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
Cooling fan/clutch nut (H25 engine) (a): 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
^
Refill cooling system with proper coolant.
^
After installation, check each joint for leakage.