Vitara JLS (2Dr) 2WD L4-2.0L (2001)
_2wd/l4-2.0l/Page-330001.png)
Camshaft Bearing: Specifications
After applying oil to housing bolts, tighten them temporarily first. Then tighten them by following sequence ("1" - "23") as shown in the figure.
Tighten a little at a time and evenly among bolts and repeat tightening sequence 2 or 3 times before they are tightened to specified torque.
Tightening torque:
Camshaft housing bolt (a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
