Vitara JLS (2Dr) 2WD L4-2.0L (2001)
_2wd/l4-2.0l/Page-403005.png)
5. Install sprockets to intake and exhaust camshafts by aligning dark blue plate of 2nd timing chain with arrow marks on intake sprocket and exhaust
sprocket respectively.
CAUTION: Do not turn camshaft more than allowable turning range. If turned excessively, valve and piston may get damaged.
NOTE: As an arrow mark is provided on both sides, camshaft timing sprocket has no specific installation direction.
6. Install intake and exhaust camshaft timing sprocket bolts. To install it, fit a spanner to hexagonal part at the center of camshaft to hold stationary.
Tightening torque
Camshaft timing sprocket bolt (a): 80 Nm (8.0 kg-m, 57.5 ft. lbs.)
7. Push back plunger (1) into tensioner body (2) and hold it with stopper (3) at the position by inserting stopper (3) into body (2).
