Vitara JLS (2Dr) 2WD L4-2.0L (2001)
_2wd/l4-2.0l/Page-403006.png)
8. Install timing chain tensioner adjuster No. 2 (1) with gasket.
Tightening torque
Timing chain tensioner adjuster No. 2 bolt (a): 11 Nm (1,1 kg-m, 8.0 ft. lbs.)
Timing chain tensioner adjuster No. 2 nut (b): 45 Nm (4.5 kg-m, 33.0 ft. lbs.)
9. Pull out stopper (2) from timing chain tensioner adjuster No. 2 (1).
10. Turn crankshaft 2 rotations clockwise then align timing mark on crankshaft and timing mark on cylinder block as shown in the figure.
Check that timing marks of cylinder head and cylinder block are in match with match marks on sprockets respectively.
11. Apply oil to timing chains, tensioner, tensioner adjusters, sprockets and guides.
12. Install timing chain cover.
13. Install cylinder head cover.
14. Install oil pan and oil pump strainer.
15. Install cooling system and other parts.
16. Refill cooling system with coolant, front differential with gear oil, engine with engine oil and power steering system with specified fluid.
17. Verify that there is no coolant leakage, power steering fluid leakage, exhaust gas leakage and oil leakage at each connection.
