Vitara JLS (2Dr) 2WD L4-2.0L (2001)
_2wd/l4-2.0l/Page-415002.png)
11. Remove generator belt idler pulley (1).
12. Disconnect radiator outlet hose (3) from thermostat cap.
13. With hoses connected, detach A/C compressor from compressor bracket if equipped.
14. Remove A/C compressor bracket (2) if equipped.
15. Remove crankshaft pulley bolt. To lock crankshaft pulley (1), use special tool (camshaft pulley holder) with it as shown in the figure.
Special tool
(A): 09917-68221
CAUTION: Be sure to use the following bolt for fixing special tool to crankshaft pulley.
Bolt size: M8, P1.25, L = 45 mm
Strength: 7T
16. Remove crankshaft pulley (1).
If it is hard to remove, use special tools (steering wheel remover and bearing puller attachment) as shown in the figure.
If bolts of steering wheel remover are too long, replace them with those of suitable length.
Special tool
(A): 09944-36011
(B): 09926-58010
