Vitara JLS (2Dr) 2WD L4-2.0L (2001)
Control Assembly: Service and Repair
Heater Control Lever Assembly
REMOVAL
1. Disconnect negative (-) cable at battery.
2. Disable air bag system. Refer to "DISABLING AIR BAG SYSTEM".
3. Remove heater mode control switch, refer to "HEATER MODE CONTROL SWITCH".
4. Remove glove box.
5. Disconnect control cables (3) from blower motor unit (2) and heater unit (1).
6. Disconnect blower motor switch (1) connector at coupler.
7. Remove heater control lever assembly (2).
INSTALLATION