Vitara JLS (2Dr) 2WD L4-2.0L (2001)
_2wd/l4-2.0l/Page-739002.png)
6. Turn ON tank pressure control solenoid valve by using SUZUKI scan tool (1) with ignition switch ON.
In this state, blow nozzle "A" (3).
Air should come out of nozzle "B" (4) and not out of filter (2).
7. If check results are as described above, tank pressure control solenoid valve and its circuit are in good condition, connect vacuum hoses securely.
If not, check tank pressure control solenoid valve, wire harness and connectors.
