Vitara JLS (2Dr) 2WD L4-2.0L (2001)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
1. Disconnect negative cable (-) at battery.
2. Disconnect connector from IAC valve.
3. Remove IAC valve from throttle body.
INSTALLATION
1. Install new O-ring to throttle body.
2. Install IAC valve to throttle body.
3. Tighten IAC valve screws to specified torque.
Tightening torque
IAC valve screw (a): 3.5 N.m (0.35 kg.m, 2.5 lb-ft)
4. Connect IAC valve connector securely.
5. Connect negative cable (-) to battery.