Vitara JLS (2Dr) 2WD L4-2.0L (2001)
_2wd/l4-2.0l/Page-802002.png)
^
Figure at the left shows shift solenoid valve (2) check. Check TCC solenoid valve also in the same way.
INSTALLATION
Reverse removal procedure to install solenoid valves and noting the following points.
^
For details of solenoid valve installation, refer to "UNIT REPAIR". Use new gasket and O-ring.
^
Install oil tubes in such order as shown in the figure.
^
For details of oil pan installation, refer to "UNIT REPAIR". Use new oil pan gasket.
^
Tighten universal joint flange bolts & nuts and exhaust pipe bracket bolts to specified torque.
^
Fill A/T fluid and check fluid level.
^
Check for fluid leakage after warming up A/T.
