Vitara JLS (2Dr) 2WD L4-2.0L (2001)
7. After checking fuel pressure, remove fuel pressure gauge.
CAUTION:
As fuel feed line is still under high fuel pressure, make sure to release fuel pressure according to the following procedures.
-
Place fuel container under joint.
-
Cover joint with rag and loosen joint nut slowly to release fuel pressure gradually.
8. Install plug boll to fuel delivery pipe.
Use new gasket.
Tighten it to specified torque, using backup wrench.
Tightening torque
Fuel delivery pipe plug bolt (a): 30 N.m (3.0 kg.m, 22.0 lb-ft)
9. With engine OFF and ignition switch ON, check for fuel leaks.