Vitara JLS (2Dr) 2WD L4-2.0L (2001)
Clutch Master Cylinder: Service and Repair
Disassembly and Assembly
DISASSEMBLY PARTS OF CLUTCH MASTER CYLINDER
1. Reservoir cap
2. Cylinder
3. Piston assembly
4. Push rod
5. Piston stopper
6. Circlip
7. Boot
8. Lock nut
9. Clevis
DISASSEMBLY
1. Remove boot and then circlip (1) with piston (3) pushed in.
2. Remove push rod (2) and blow compressed air gradually into hole for pipe connection to remove piston assembly, using care to prevent it from
jumping out.
INSPECTION
Inspect all disassembled parts for wear or damage and replace parts if necessary.
NOTE:
^
Wash disassembled parts with brake fluid.