Vitara JLS (2Dr) 2WD L4-2.0L (2001)
it becomes thin.
9. Break with a chisel (1) the thin ground sensor rotor, and it can be removed (if equipped with ABS).
10. In order to remove the retainer ring (1) from the shaft (3), grind with a grinder two parts (2) of the bearing retainer ring as illustrated till it becomes
thin.
CAUTION: Be careful not to grind too far not to damage the shaft.
11. Break with a chisel (1) the thin ground retainer ring, and it can be removed.
12. Remove bearing (2) from shaft (1) by using hydraulic press (3)
13. Remove bearing retainer.