Vitara JLS (2Dr) 2WD L4-2.0L (2001)
Shift Interlock Solenoid: Testing and Inspection
INSPECTION
1. Check to make sure that select lever cannot be moved to any other range from "P" range position when ignition switch key is at "ACC" position, at
"LOCK" position (or it is removed from keyhole of ignition switch) or brake pedal is not depressed.
2. Shift select lever to "P" range position, release knob button (1) and check for the following.
^
Ignition key can be turned between "LOCK" and "ACC" positions back and forth and also it can be removed from ignition switch.
^
With shift lock solenoid rod (2) (or manual release plate (2)) moved in arrow direction and ignition key turned to "ACC" position, select lever
(1) can be shifted from "P" range position to any other range.
^
With shift lock solenoid rod (2) (or manual release plate (2)) moved in arrow direction and ignition key turned to "LOCK" position, select
lever (1) can not be shifted from "P" range position to any other range.
^
When ignition switch is turned "ON" and brake pedal , depressed, select lever can be shifted from "P" range position to any other range.