Vitara JLS (4Dr) 2WD L4-2.0L (2000)
_2wd/l4-2.0l/Page-353002.png)
^
Key 1 on crankshaft position as shown.
^
Arrow mark on idler sprocket 2. points upward vertically.
^
The marks on sprockets 3. match with marks on cylinder head.
Note that this step must be followed for reinstallation of timing chain.
8. Remove timing chain tensioner adjuster No.2.
To remove it, slacken 2nd timing chain by turning intake camshaft counterclockwise a little while pushing back pad.
9. Remove intake and exhaust camshaft timing sprocket bolts.
To remove it, fit a spanner to hexagonal part at the center of camshaft to hold it stationary.
10. Remove camshaft timing sprockets and 2nd timing chain.
CAUTION: After 2nd timing chain is removed, never turn intake camshaft, exhaust camshaft and crankshaft independently more than such an
extent as shown. If turned, interference may occur between piston and valves and valves themselves, and parts related to piston and valves may be
damaged.
INSPECTION
