Vitara JLS (4Dr) 2WD L4-2.0L (2000)
_2wd/l4-2.0l/Page-1093001.png)
Blower Motor Resistor: Testing and Inspection
HEATER BLOWER RESISTOR INSPECTION
Measure each terminal-to-terminal resistance on resistor.
Resistance
H-LO: Approx. 2.0 Ohms.
H-M1: Approx. 1.0 Ohms.
H-M2: Approx. 0.4 Ohms.
If measured resistance is incorrect, replace heater blower resistor.
