Vitara JLS (4Dr) 2WD L4-2.0L (2000)
_2wd/l4-2.0l/Page-960002.png)
3. With lever inserted between stator core and front housing, separate generator into front and rear sides.
4. Loosen pulley nut by using vise and take off pulley.
NOTE:
-
When using vise, put clean cloth between rotor and vise so as not to cause damage to rotor.
-
Be sure to hold the location A. Do not hold the location B as it does not have enough structural strength.
5. Remove rotor from front housing.
