Vitara JLS (4Dr) 2WD L4-2.0L (2000)
Power Steering Pump: Service and Repair
REMOVAL
NOTE: Be sure to clean each joint of suction and discharge sides thoroughly before removal.
1. Remove suction hose from pump, then disconnect battery negative cable.
2. Remove oil tank with suction hose.
3. Remove union bolt. Then disconnect high pressure pipe from pump.
NOTE: As fluid flows out of disconnected joints, put a receptacle under joints or a plug to pipe.
4. Disconnect pressure switch lead wire at switch terminal.
5. Loosen related bolts and remove power steering belt.
6. Remove P/S pump mounting bolts.
7. Remove P/S pump.
NOTE: Plug each port of removed pump to prevent dust or any other foreign matter from entering.
DISASSEMBLY
1. Clean its exterior thoroughly.