Vitara JLS (4Dr) 2WD L4-2.0L (2000)
_2wd/l4-2.0l/Page-1444005.png)
3. To determine installing position of glass (2) to body (3), position glass against body so that clearance "a" between upper end of glass and body is
about 5 mm (0.197 in.) and clearances between each side end (right and left) of glass and body are even. Place glass so that lug of fastener is
matched with cut in body and fit fastener. Then mark mating marks (1) on glass (2) and body (3) as shown.
Upper clearance can be adjusted by moving stoppers position.
