Vitara JLX (2Dr) 4WD L4-2.0L (2001)
_4wd/l4-2.0l/Page-1378001.png)
Power Mirror Motor: Testing and Inspection
Power Door Mirror Actuator Inspection
1. Remove garnish from door.
2. Disconnect door mirror coupler.
3. Check that door mirror operates properly when battery voltage is applied to connector terminals. Connect battery positive and negative terminal to
the door mirror terminal shown below.
If it does not follow the table's operation, replace door mirror assembly.
NOTE: When installing door mirror to door, be careful not to pinch harness between door and door mirror.
