suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 885
Page 2
background image

Compression pressure
Standard: 1400 kPa (14.0 kg/cm2, 199.0 psi) 
Limit: 1200 kPa (12.0 kg/cm2, 170.0 psi) 
Max. difference between any 2 cylinders: 100 kPa (1.0 kg/cm2, 14.2 psi) 

11. Carry out steps 8), 9) and 10) on each cylinder to obtain 4 readings.

12. After checking, install spark plugs (2) and ignition coils (1). 
13. Connect ignition coil couplers.
14. Connect accelerator cable (3) to clamp (4) (For LH steering vehicle only).

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 885