Vitara JLX (2Dr) 4WD L4-2.0L (2001)
Clutch Fluid: Service and Repair
REMOVAL
NOTE: Do not allow fluid to get on painted surface.
1. Remove dust and dirt from each joint of hose (2) and pipe (1) to be disconnected and clean around reservoir cap.
2. Take out fluid with syringe or such.
3. Disconnect fluid pipe (1) from hose (2).
NOTE: To disconnect pipe (1) from hose (2), separate them by using flare nut wrench (4) and spanner (3) so as not to kink them.
INSPECTION
Check pipe (1) and hose (2) for dent, kink, crack, dirt and dust. Replace if check result is not satisfactory.
INSTALLATION