Vitara JLX (2Dr) 4WD L4-2.0L (2001)
_4wd/l4-2.0l/Page-529001.png)
Power Steering Pressure Switch: Testing and Inspection
IDLE UP SYSTEM CHECK
1. Warm up engine to normal operating temperature.
2. Turn A/C switch OFF, if equipped.
3. Turn steering wheel fully and check idle speed.
Engine idle speed drops a little momentarily when steering wheel is turned fully but returns to its specified level immediately. If power steering
pressure switch connector is connected, check the same with that connector disconnected. Momentary drop of engine idle speed should be less
when it is connected than when disconnected.
