Vitara JLX (2Dr) 4WD L4-2.0L (2001)
_4wd/l4-2.0l/Page-126001.png)
Air Flow Meter/Sensor: Description and Operation
The MAF sensor consists of heat resistor (1), metering duct (2), molded honeycomb (3), body, control circuit (4), etc.
It detects the mass flow of the air drawn (5) into the engine and sends that information to ECM (PCM) as a current signal.
ECM (PCM) uses the signal as one of the signals to control various devices.
This MAF sensor is a thermal control type including a heat-resistor and a control circuit (1).
The heat resistor is cooled off by the intake air and the control circuit controls the heat-resistor temperature (the amount of electric current flowing to the
heat-resistor) so as to keep it within a certain difference range from the ambient temperature. Then this control value is output as a current signal.
