Vitara JLX (2Dr) 4WD L4-2.0L (2001)
-
For 4WD vehicle
When installing axle shaft drive flange to wheel hub, apply sealant "A" to mating surface of axle shaft drive flange.
"A": Sealant 99000-31090
Tightening torque (a): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
-
For installation procedures of wheel hub component, refer to Wheel Hub; Service and Repair.
-
Connect tie-rod end to knuckle and tighten new tie-rod end nut.
Tightening torque
Tie-rod end nut (a): 43 Nm (4.3 kg-m, 31.5 ft. lbs.)
-
For any tightening torque other than those specified in text, refer to Specifications.