Vitara JLX (2Dr) 4WD L4-2.0L (2001)
Tie Rod Boot: Service and Repair
REMOVAL
1. Remove steering gear case.
2. For ease of adjustment after installation, make marking of tie-rod end lock nut position of tie-rod thread.
3. Loosen tie-rod end lock nut and remove tie-rod end.
4. Remove boot band and clip.
5. Remove boot from tie-rod.
6. Unbend washer (2 places), and remove tie-rod from rack.
INSTALLATION
1. Install new tie-rod lock washer and tie-rod to rack.