Vitara JLX (2Dr) 4WD L4-2.0L (2001)
_4wd/l4-2.0l/Page-1155002.png)
8. By using puller (1), disconnect knuckle (2) from ball stud (3).
9. While lowering jack, remove knuckle/wheel spindle comp.
10. Remove inner oil seal (for 4WD vehicle), knuckle cap (for 2WD vehicle), dust cover and wheel spindle.
11. For 4WD vehicle, remove drive shaft bearing (2) by using special tool.
Special tool (A): 09923-74510 (B): 09930-30102
INSTALLATION
