suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Wheels and Tires|Service Precautions|Page 3119 > < Wheels and Tires|Service Precautions|Page 3117
Page 1
background image

Tires: Testing and Inspection

IRREGULAR AND/OR PREMATURE WEAR 

Irregular and premature wear has many possible causes. Some of them are: incorrect inflation pressures, lack of tire rotation, driving habits, improper
alignment.
If the following conditions are noted, rotation is in order:
1. Front tire wear is different from rear.
2. Uneven wear exists across the tread of any tire.
3. Left front and right front tire wear is unequal.
4. Left rear and right rear tire wear is unequal.
5. There is cupping, flat spotting, etc.

A wheel alignment check is in order if the following conditions are noted:
1. Left front and right front tire wear is unequal.
2. Wear is uneven across the tread of any front tire.

3. Front tire treads have scuffed appearance with "feather" edges on one side of tread ribs or blocks.

WEAR INDICATOR 

The original equipment tires have built-in tread wear indicators to show when tires need replacement. These indicators will appear as 12 mm (0.47
inch)
 wide bands when the tire tread depth becomes 1.6 mm (0.063 inch). When the indicators appear in 3 or more grooves at 6 locations, tire
replacement is recommended.

RADIAL TIRE WADDLE 

Wheels and Tires|Service Precautions|Page 3119 > < Wheels and Tires|Service Precautions|Page 3117