Vitara JLX (2Dr) 4WD L4-2.0L (2001)
4. Clean contact surfaces of old adhesive, paint or bare metal thoroughly.
If surfaces of paint or bare metal come out, apply primer (2) for body with caution not to apply primer to surface of adhesive remaining on body.
NOTE:
-
Be sure to refer to primer maker's instruction for proper handling and drying time.
-
Do not touch body and old adhesive surfaces where glass is to be adhered.
5. Install new molding (1) to glass (2).
6. Clean glass surface to be adhered to body with clean cloth. If cleaning solvent is used, let it dry for more than 10 minutes.
Cleaning area for windshield (distance from the edge of glass or molding)
"a": 30 - 50 mm (1.18 - 1.97 in.)