Vitara JLX (4Dr) 4WD L4-2.0L (2000)
_4wd/l4-2.0l/Page-1303001.png)
Cruise Control Switch: Testing and Inspection
Cruise Main Switch
1. Disconnect battery negative cable (-) at battery.
2. Disconnect connector from cruise main switch.
3. Remove cruise main switch from instrument panel.
4. Check for resistance between "IG" and "LOAD" terminals.
Switch button released : Infinity
Switch button pressed : About 3.9 kOhms.
If check result is not satisfactory, replace.
5. Install cruise main switch to instrument panel and connect connector securely.
