suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Magnet Clutch (Denso Compressor)|Page 2996 > < Magnet Clutch (Denso Compressor)|Page 2993
Page 1
background image

Compressor Clutch: Testing and Inspection
Magnet Clutch (Denso Compressor)

Magnet Clutch (Denso Compressor)

a. Inspect pressure plate and rotor for signs of oil.
b. Check clutch bearings for noise and grease leakage.
c. Using an ohmmeter, measure resistance of stator coil between clutch lead wire and ground.

If measured resistance is not within tolerance, replace coil.

Standard resistance: 3.9 - 4.3 Ohms at 20 °C, 68 °F

Magnet Clutch (Denso Compressor)|Page 2996 > < Magnet Clutch (Denso Compressor)|Page 2993