Vitara JLX (4Dr) 4WD L4-2.0L (2000)
_4wd/l4-2.0l/Page-512001.png)
Malfunction Indicator Lamp: Testing and Inspection
MALFUNCTION INDICATOR LAMP (MIL) CHECK
1. Turn ON ignition switch (but the engine at stop) and check that MIL lights.
If MIL does not light up or dims, go to "Diagnostic Flow Table A-1" for troubleshooting.
2. Start engine and check that MIL turns OFF.
If MIL remains ON, and no DTC is stored in ECM (PCM), go to "Diagnostic Flow Table A-2" for troubleshooting.