suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Throttle Position Sensor|Testing and Inspection|Page 1663 > < Air Flow Meter/Sensor|Testing and Inspection|Page 1659
Page 1
background image

Throttle Position Sensor: Testing and Inspection

1. Disconnect negative cable at battery and coupler from TP sensor.

2. Using ohmmeter, check resistance between terminals under each condition given in table.

If check result is not satisfactory, replace TP sensor.

3. Connect TP sensor coupler securely.
4. Connect negative cable to battery.

Throttle Position Sensor|Testing and Inspection|Page 1663 > < Air Flow Meter/Sensor|Testing and Inspection|Page 1659