Vitara JLX (4Dr) 4WD L4-2.0L (2000)
_4wd/l4-2.0l/Page-624001.png)
Camshaft Position Sensor: Service and Repair
CAUTION: Disassembly is prohibited. If anything faulty is found, replace as an assembly unit.
REMOVAL
1. Disconnect CMP sensor coupler.
2. Remove CMP sensor by removing bolt(s).
INSTALLATION
NOTE: After installing CMP sensor, adjust ignition timing. (Refer to "Ignition Timing Check And Adjustment").
1. Install a new O-ring with engine oil applied to CMP sensor.
