Vitara JLX (4Dr) 4WD L4-2.0L (2000)
_4wd/l4-2.0l/Page-699002.png)
-
If fluid does not come out with vigor in above step 2 inspection, do not re-use that solenoid valve.
-
Figure shows shift solenoid valve check. Check TCC solenoid valve also in the same way.
INSTALLATION
Reverse removal procedure to install solenoid valves and noting the following points.
-
Install oil tubes in such order as shown in figure.
-
Tighten universal joint flange bolts & nuts and exhaust pipe bracket bolts to specified torque.
-
Fill A/T fluid and check fluid level according to procedure described in "CHANGING FLUID" previously.
-
Check for fluid leakage after warming up A/T.
