Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
8) Remove bleeder plug cap. Attach a vinyl tube to bleeder plug of wheel cylinder, and insert the other end into container.
9) Pressurize the bleeding tool (if available) to 2.4 kg/cm (35 Psi).
Bleeding
NOTE: The automated bleed procedure may be terminated by pressing the EXIT button on the SUZUKI SCAN TOOL
1) Turn ignition switch to "ON".
2) Make sure that all bleeder plugs are closed. If use pressure bleeding tool, install it in this step and set its pressure at 2.4 kg/cm2 (35 Psi).
3) Select "Auto Bleed" under "Misc. Tests" on scan tool and press "ENTER".