Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
1) Before inserting piston into cylinder, install boot onto piston as shown.
2) Fit boot as it is in above figure into boot groove in cylinder with fingers.
Check to make sure that boot is fitted into boot groove in cylinder completely in its circumference.
3) Insert piston into cylinder by hand and fit boot in boot groove in piston.
4) To confirm that boot is fitted in its groove in cylinder properly, pull piston out of cylinder a little but do not take it all out.
5) Insert piston into cylinder by hand.
6) Install anti noise shim (H25 engine).
Caliper