Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS ACTUATOR (EBCM & BPMV) ASSEMBLY
CAUTION:
Never disassemble ABS actuator (EBCM & BPMV) assembly, loosen blind plug or remove motor.
Performing any of these prohibited services will affect original performance of ABS actuator (EBCM & BPMV) assembly.
INSPECTION
^
Check ABS actuator (EBCM & BPMV) assembly for fluid leakage. If any, replace it.
REMOVAL
1) Disconnect negative cable from battery.
2) Using special tool, disconnect brake pipes from ABS actuator (EBCM & BPMV) assembly.
Special Tool (A): 09950-78210
NOTE:
Put bleeder plug cap onto pipe to prevent fluid from spilling.
Do not allow brake fluid to get on painted surfaces.
3) Disconnect ABS actuator (EBCM & BPMV) assembly connector.