Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-345001.png)
Camshaft Bearing: Specifications
After applying engine oil to housing bolts, tighten them temporarily first. Then tighten them by the following sequence as shown in the figure.
Tighten a little at a time and evenly among bolts and repeat tightening sequence 3 to 4 times before they are tightened to specified torque.
Tightening torque
Camshaft housing bolt (a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
