Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
Compression Check: Testing and Inspection
COMPRESSION CHECK
Check compression pressure on all four cylinders as follows:
1) Warm up engine.
2) Stop engine after warming up.
NOTE: After warming up engine, place transmission gear shift lever in "Neutral" (shift selector lever to "P" range for A/T model), and set
parking brake and block drive wheels.
3) Disconnect fuel injector wire harness connector.
4) Remove ignition coil assemblies and all spark plugs.
5) Install special tool (Compression gauge) into spark plug hole.
Special Tool
(A): 09915-64510-001
(B): 09915-64510-002
(C): 09915-64530
(D): 09915-67010