Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-378002.png)
6) Remove cylinder head cover.
7) Disconnect CMP sensor connector and remove CMP sensor case from cylinder head. Place a container or rag under CMP sensor case, for a small
amount of oil flows out during removal of case.
8) After loosening all valve adjusting screw lock nuts, turn adjusting screws back all the way to allow all rocker arms to move freely.
9) Remove camshaft housing and camshaft.
NOTE: To remove camshaft housing bolts, loosen them in such order as indicated in figure, a little at a time.
10) Remove rocker arm shaft plug and timing belt inside cover.
