Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-378007.png)
1) Apply engine oil to rocker am, shaft and rocker arms.
2) Install rocker arm shaft, rocker arm (exhaust side) and rocker arm spring.
3) Check O-ring for damage or deterioration. With O-ring groove in rocker arm shaft exposed to transmission side once, install O-ring to rocker arm
shaft.
4) Set rocker arm shaft so that its cut part faces down and becomes in parallel with head cover mating surface.
5) Install rocker arm shaft bolts and tighten them to specified torque.
Tightening Torque (a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
