Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
WATER PUMP, GENERATOR, POWER STEERING AND/OR A/C COMPRESSOR (IF EQUIPPED) DRIVE BELT INSPECTION (J20
ENGINE)
1. Disconnect negative (-) cable at battery.
2. Inspect belt for cracks, cuts, deformation, wear and cleanliness. If any of above conditions are found, replace. Also, check belt for tension.
Tension indicator "B" should be the right of indicator "A" as shown in the figure. If indicator "B" is found to the left of indicator "A", replace
generator belt.
ENGINE COOLING FAN DRIVE BELT INSPECTION (J20 ENGINE)
1. Disconnect negative (-) cable at battery.
2. Inspect belt for cracks, cuts, deformation, wear and cleanliness. If any defect exists, replace. Check belt for tension.
Cooling fan belt tension "a":
5 - 7 mm (0.20 - 0.27 in.) deflection under 100 N (10 kg, 22 lb) pressure.