Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-409002.png)
6) Disconnect accelerator cable and A/T throttle cable (for A/T) from throttle body.
7) Disconnect following hoses:
^
Brake booster hose from intake manifold
^
Canister purge hose from EVAP canister purge valve
^
Engine cooling water (coolant) hose (outlet side) from throttle body
^
Radiator inlet hose from thermostat cap
^
PCV hoses from intake manifold and throttle body
^
Fuel feed hose and return hose from each pipe
^
Vacuum hose from intake manifold
8) Remove generator adjust arm.
9) Remove intake manifold stiffeners from intake manifold.
10) Remove intake manifold with throttle body from cylinder head, and then its gasket.
INSTALLATION
Reverse removal procedure for installation noting the followings.
