Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-409003.png)
^
Use new intake manifold gasket.
^
When installing intake manifold, install clamps at positions as shown in figure.
^
Adjust accelerator cable play and A/T throttle cable (for A/T) play.
^
Check to ensure that all removed parts are back in place. Reinstall any necessary parts which have not been reinstalled.
^
Refill cooling system, referring to Cooling System.
^
Adjust water pump drive belt tension.
^
Upon completion of installation, turn ignition switch ON but engine OFF and check for fuel leaks.
^
Finally, start engine and check for engine coolant leaks.
