Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-454003.png)
6) With engine oil applied to O-ring, install oil level gauge guide.
7) Install crankshaft pulley, water pump pulley, pump drive belt, cooling fan/clutch and fan shroud.
Tightening Torque
Cooling fan/clutch nuts: 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
Crankshaft pulley No.2 bolts: 16 Nm (1.6 kg-m, 11.5 ft. lbs.)
8) Adjust cooling fan belt tension.
9) Connect negative cable at battery.
10) Fill coolant.
11) After installation, check each part for leakage.
