Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
Air Register: All Technical Service Bulletins
A/C - Vent Registers Loose in Housing
TSB No. TS 01-01 11019
Section Title: HVAC
Division: Automotive
Category: Technical
SUBJECT:
HVAC VENT REGISTERS LOOSE IN HOUSING
MODEL:
ESTEEM, VITARA AND GRAND VITARA
YEAR:
1998-99 (ESTEEM), 1999 (VITARA/GRAND VITARA)
CONDITION:
HVAC Vent Registers are loose in the housing and do not hold a set position.
CAUSE:
Insufficient friction between the register and register housing.
CORRECTION:
Install a wave washer between the Vent Register Swivel Bushing and Vent Register.
PARTS INFORMATION:
1.
Using a small blade screwdriver, CAREFULLY spread the side of the vent register housing away from the vent register just below the swivel
point.
NOTE:
Tape the end of the screwdriver to help prevent damage to the vent register and housing.