Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
Control Assembly: Service and Repair
Control Lever Assembly
Control Lever Assembly
REMOVAL
1. Disconnect negative (-) cable at battery.
2. If equipped with air bag system, disable air bag system.
3. Remove mode control switch, refer to step 3) to 6) of item MODE CONTROL SWITCH REMOVAL.
4. Remove glove box.
5. Disconnect control cables from blower motor unit and heater unit.
6. Disconnect heater blower motor switch connector.
7. Remove heater control lever assembly.
INSTALLATION