Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-1349002.png)
1. Install in reverse order of removal procedure.
2. Adjust cables as follows.
1. Move control lever fully in arrow direction.
2. Push heater lever fully in arrow direction and fix cable with clamp in position as shown in figure.
3. Push blower lever fully in arrow direction and fix cable with clamp in position as shown in figure.
NOTE: After installing control cables, be sure that control levers move smoothly and stop at proper position.
3. If equipped with air bag, enable air bag system.
