Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-308003.png)
4) The first part of automated bleed procedure will cycle pump motor and front release valves for 1 minute (i). After the cycling has stopped, scan
tool will enter "cool down" mode and display a 180 seconds timer (ii). Automated air bleed will not continue until this timer has expired, and
cannot be overridden.
5) Open bleeder plug (screw) as scan tool instructs (iii). And press "ENTER".
6) Scan tool will then cycle the respective release valve and pump motor for 60 seconds (iv).
If pressure bleeding tool is not available, repeat depressing brake pedal during this step to keep applying pressure to brake line and bleed.
Fill master cylinder reservoir with brake fluid and keep at least one-half full of fluid during this operation.
7) Close bleeder plug (screw) as scan tool instructs (v).
